Peugeot 308 Key Fob Replacement
Peugeot's 308 might be catching on a little, but it still feels appealing. It's not the most luxurious car in its class, but it is a pleasant and peaceful driving experience.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. Whether the problem is persistent or intermittent the following tips will help.
Water Damage
If you accidentally drop your key fob in an eddy, or it is wet while kayaking, canoeing, rafting, or canyoning, the fob is likely to be damaged by water. The best way to prevent this from happening is to always keep it in a dry bag when you're going outdoors or doing things where the fob might be exposed to excessive amounts of water.
thekeylab.co.uk 'll also need to ensure that the fob is dry before opening it up and using it again. If you smell any odors from the fob (such as industrial liquid or windshield washer fluid) This is a further indication that it's been submerged.
A wet circuit could cause the battery's energy to drain or even explode. If you're able fish your 308 key fob out from the body of water it was stuck in then flip the button side down and shake out as much water as possible before opening the case. After opening it, remove the battery and clean the circuit board with an abrasive soaked in 90-percent isopropyl alcohol.
Other reasons that your Peugeot 308 remote entry keyless system might not work include a dead coin cell battery, receiver module problems signal interference, or a defective chip. If none of these causes the reason, you may try resetting the system by removing the battery that is 12 volts for around 15 minutes.
Dead Coin Battery
Peugeot cars are equipped with remote start technology that lets drivers start their car from some distance, which allows them to warm up or cool down the vehicle before they get in. This feature is extremely beneficial particularly during the winter's cold and chilly months. Remote start systems can cease to function for a variety reasons, such as the battery being dead.
The coin-shaped battery that is inside the key fob can last between two and four years depending on the frequency with which it is used, the location it was purchased and how it is utilized. The date for use-by will be printed on the package or mentioned in the user's manual.
If the key fob has stopped working after exposure to clean tap water it is recommended to remove the battery, then clean the electronic chip with a paper towel and isopropyl alcohol, then dry it thoroughly before replacing it. If exposed to salty or soapy water, the chip could be fried and you will have to replace the key fob completely.
If you're not sure the battery is defective it is possible to test its voltage with a multimeter that is set to the car's voltage range and connected to the terminals for minus and plus. The voltage should range from 12-13 volts, but if it is lower, then the battery needs to be replaced. You can also reset your computer onboard by disconnecting and reconnecting the 12 volt batteries in reverse order. (positive cable first, then negative cable). The engine should now begin.
Faulty Receiver Module
If you're not getting the "Key Detected" message on your dashboard, then it's possible that the receiver module has created a fault. It's the part which sends out an alert when your key fob goes off. It also functions as an alarm and prevents the car from starting if it doesn't have the correct key.
This could result from a variety of factors including water damage or simply the aging process. If the electronic chip in your Peugeot 308 keyfob has been damaged by dirty tap water it could be due to the fact that the keyfob was in contact with it. In this scenario, you'll need to take it out and thoroughly clean it with isopropyl or electronic cleaner. Once the battery has dried you can try it again.
If the issue continues to persist then it's a good idea to see an area Peugeot specialist or locksmith. They can utilize an instrument for diagnosing to pinpoint the issue and then fix it.
Losing your Peugeot keys to your car is an extremely stressful experience. However, a reputable auto locksmith can address the issue in only a few minutes. They can program your vehicle and cut a brand new, working key for you. Click here to find a locksmith near you.
Faulty Electronic Chip
The electronic chip that is in the Peugeot 308 key fob plays an essential part in the remote control system. If the chip is damaged, you could be unable to start your car or receive a message stating "anti-theft". In this scenario, the only solution is to replace the key. Auto locksmiths who are professionals are able to offer the service in the shortest time.
The chip in the chip of your Peugeot 308 key fob can be damaged by sweat, water damage, dirt or other reasons. If your Peugeot 308 key fob has been exposed to soapy water, you should take it to the cleaners immediately. You can make use of a towel and isopropyl alcohol to wipe the electronic component. Then, you need to allow the battery to completely dry.
Sometimes keys may cease to function due to radio interference. This can happen when other devices operate on the same frequency as your Peugeot keyfob. This could be due to unsafe conditions or objects that are within the vicinity of the vehicle. If you have this issue it is advised to visit a Peugeot dealership.
The Peugeot 207/308 key fob is very delicate and requires special care. It is crucial not to throw or drop the key fob. If you lose it, try to find it as quickly as is possible. You can reset all on-board computers by disconnecting the battery that is 12 volts for a short period of time. Remove the negative cable before the positive.